
| Features | N/A
                                                                                          Undetectable Gloss / Glare Free Available in Green, Blue, White, and Black Superior Opacity and Specific Wavelength Profile | 
| Surface Preparation | N/A Remove all dirt, grease, and loose, peeling paint. Sand previously painted surfaces. For best results, prime with the appropriate Warren primer. Use a Metalcoat primer over steel or aluminum. Allow adequate dry time before recoating. Self-priming is possible over drywall, plaster, and concrete. | 
| Mixing and Thinning | N/A Stir or shake well. Thin sparingly with water to spray. Do not over-thin. | 
| Application | N/A Brush, roll, spray. Thin as directed. Apply between 50 and 90ºF with the relative humidity less than 80%. Cover objects in the vicinity of painting to avoid paint drips or spatters. | 
| Dry Time | N/A One hour to touch. Two hours to handle. 24 hours hard | 
| Recoat Time | N/A After four hours. | 
| Appearance | N/A Super-flat finish available in green, blue, white, and black. | 
| Composition | N/A Rutile titanium dioxide, aluminum and magnesium silicate, and calcium carbonate. | 
| Vehicle | N/A Vinyl acrylic copolymer emulsion. | 
| % Solids by Weight | N/A 53.7 | 
| % Solids by Volume | N/A 33.8 | 
| Coverage | N/A 387 square feet per gallon at 1.4 mils DFT (100% transfer and zero profile). Realistically 75-150 square feet per gallon over extremely rough surfaces. Approximately 300 square feet per gallon is possible over previously primed or painted drywall. | 
| V.O.C. | N/A 0.25 lb/gal (31 g/l) with water; 0.69 lb/gal (83 g/l) without water. | 
| Cured Film Properties | N/A Porous, open film subject to burnishing. | 
| Standard Packaging | N/A One gallon cans. Fives and drums are available by special order. | 
